This article explains how to get the full version free of cost on your computer. You can download DipTrace version 4.3 from the link provided below.

Table of contents

  • About the software
  • DipTrace® v4.3 System requirements
  • How to Download and Install DipTrace V4.3
  • Required files

Information about the software

DipTrace hierarchical schematic is based on a multi-sheet circuit structure. Hierarchical blocks can be inserted into the main sheet or into each other as many times as needed. If there are loop structures in hierarchy verification reports, they can be inserted into the main sheet.

All actions and features are visual and intuitive for the designer. Component pins may be connected visually with wires/buses or logically by connecting them using net port, bus ports, and/or by name.

ERC ensures that engineers can work in an error-free design environment. With detailed customization reports, Electrical Rule Control short circuits, superimposing, unconnected pins and one-pin networks, and checks connections according to pin types.

The schematic capture module allows for exchanging schematics and drawings with other CAD packages (Altium, Eagle, P-CAD, PADS, OrCAD, KiCAD); support of Accel, Allegro, Mentor, OrCAD, PADS, PCAD, Protel, Tango netlists.

The main features of DipTrace are:

    • Multi-level Hierarchical Schematics
    • Visual and Logical Organization
    • Multi-level Hierarchy
    • Check the Electrical Rule
    • Import/Export

DipTrace V4.3 System Requirements

  • Mac OS X (Intel-based, XQuartz required)
  • Linux (with Wine).
  • Recommended system requirements: Pentium III processor at 1GHz or better, 1Gb RAM or more, 2,0 Gb of free HDD space, 1024×768 resolution screen resolution or greater, OpenGL / DirectX 9.0, or higher

How To Download and Install DipTrace Version 4.3

  1. Click on the download button(s) below and finish downloading the required files. Depending on how fast you are downloading, it might take several minutes to an hour.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: QWERTY!

  3. Run Setup.exe, and then install the software